Send hot air where it is needed.

Heat Transfer kits move excess heat from one room to another, so you heat your house more efficiently.

Distribute Trapped Hot Air

Home insulation and heating products (fires, gas, electric heating, etc) have all improved in quality and efficiency over the years and in many instances home owners are finding their heating systems are over-efficient for the room they are situated in. Hot air rises and forms an extremely hot pocket of air trapped below the ceiling – you may be comfortable at seated level, with a layer of 35 degrees Celsius air trapped near the ceiling level.

Transfer the Heat to Another Room
This problem is easily and inexpensively overcome with the installation of a heat transfer system, which utilises this otherwise wasted heat by moving it throughout the home.

How the Heat Transfer Kit Works

The system uses a fan and insulated ducting to transfer excess heat quietly from one room to as many as three other rooms in a house.
We recommend placing the inlet grille on the opposite side of the room to the heat source. This allows the room to warm first before transferring excess heat.
Standard Heat Transfer Kits are available in 0ne, Two and Three Room kits.

The heat transfer kit is most effective when the primary heat source is a wood burner, gas fireplace or Reverse cycle air-conditioner. This is an energy efficient way of transferring the excess heat from these heat sources.

Improved Circulation

As air is removed from the heated room, replacement air is drawn from adjacent rooms, creating a natural re-circulation, hence warm, dry air is constantly being circulated throughout the home.

Control

You can control which rooms you want the heat transferred to. The round outlet diffusers can be fully adjusted in each room. If you require more heated air entering one room than another, then simply adjust the diffusers to your requirements. You can also completely shut off a diffuser if you do not wish to deliver the heated air to a particular room (perfect for guest bedrooms).

We have 3 main kits available to transfer the air from one heated room to 1,2 or 3 other locations.

AIR TRANSFER KITS

Kit 1 – 1 Room Kit

2 Off – 3m lengths 6” Greenduct Rt0.75
2 Off – 6” Unijets
1 Off – 6” R2E 190 Centrifugal Fan (Plug supplied loose in box)
1 Off – Hanging strap
1 Off – Duct tape
1 Off – Pair small fan mounts
1 Off – Controller

$400 inc. GST

 

Kit 3 – 2 Room Kit

2 Off – 3m lengths 6” Greenduct Rt0.75
2 Off – 3m lengths 8” Greenduct Rt0.75
2 Off – 6” Unijets
1 Off – 8” Unijets
1 Off – 8” R2E 220 Centrifugal Fan (Plug supplied loose in box)
1 Off – 8-6-6 Plain Y piece
1 Off – Hanging strap
1 Off – Duct Tape
1 Off – Pair small fan mounts
1 Off – Controller

$560 inc. GST

 

Kit 4 – 3 Room Kit

3 Off – 3m lengths 6” Greenduct Rt0.75
2 Off – 3m lengths 10” Greenduct Rt0.75
3 Off – 6” Unijets
1 Off – 10” Unijets
1 Off – 10” R2E 220 Centrifugal Fan (Plug supplied loose in box)
1 Off – 10-6-6-6 Plain BTO
1 Off – Hanging strap
1 Off – Duct tape
1 Off – Pair small fan mounts
1 Off – Controller

$620 inc. GST

 

 

Transfer it. Don’t waste it.

Shift heat from one room to another, quickly and easily with an air transfer kit.
Utilise an existing heating/cooling source to its full potential and overcome the need for separate heating appliances in individual rooms.
Choose from a variety of 1,2 or 3 room air transfer kits, individually tailored to suit your needs
An air transfer kit can often be the most economical way or redirecting air within your home.
Air Transfer Kits are ideal for homes with open fires or wood burners.

* Please note all electrical work should only be carried out by a licensed electrician.